1.Sink Installation
1) Before installation, please open the packaging of the new sink, and check if the product is damaged or the fittings are missing. The edge of the flume is sharper. You may scratch your hand. Please use gloves and carefully contact the edge of the sink.
2) Installation Sink
a) Please draw a line on the kitchen plate panel according to the actual opening size of the tank.
b) Use a special cutting machine to open the hole along with the table.
c) It is appropriate to test the opening of the hole in the hole, and clean the dirt on the surface of the table if the size is suitable.
3) Fastening tank
Sink installation has two kinds, one is on the stage of the basin is installed, a basin installation, if the table is installed in the sink basin, along the edge around the stick will sink into the cabinet table waterproof glue hole, installed pull placed in the sink with a screwdriver and pull hook, locking screws. If the under-counter installation, you do not need to use a pull buckle, will sink under the table placed in the appropriate position, in between the water tank and the surface coated with a stone anti-seepage glue, on the edge of the water tank, and painted on stone glue.
2. Faucet installation
1) Installation should pay attention to the joint of the hose and valve body do not form a dead angle, so as not to break or damage the hose.
2) It is necessary to invite experienced and qualified professionals to carry out the construction and installation. When installed, the tap should avoid hard knocks, and no cement, glue, and other residues on the surface, so as not to damage the surface gloss of the coating. Attention should be paid to removing impurities from the pipe and then installing the faucet
3.Sewer and water fittings
The water fittings of the stainless steel sink are divided into two parts: the water heater and the drainage pipe. The water apparatus can be divided into 114mm and 140mm according to the diameter. The important thing is to seal the water aprons. We must ensure that the quality cannot be leaking. For 114mm's launching set, if you take apart and carefully observe it, you will know that the good slag basket with good slag is good in steel and hard, and the sealing apron has good elasticity. The diameter of the large slug is 140mm, and it is usually equipped with double-decker cages and mute glue pads to filter the irritable water.
For drainage pipes, the first seal is better. There should be a tapered rubber ring at the joint to increase its sealing performance. Second, it must have the function of separating odor. Generally, there is U or S type storage water to separate the odor.
At the same time, the bacteria and sundries in the filter net are cut off by the seal cover, and the two pollutions of the tank are completely eliminated, so as to ensure the health of the consumers. The water pipe uses high-tech nano silver ion composite material, the drainage pipe diameter is 2 inches (traditional 1.5 inches), the joint is few, the installation is convenient, the drainage is quick, and eliminates the trouble that the water pipe drainage is difficult and easy to jam.
