Cleaning Tips for Clogged Kitchen Faucets

If the kitchen faucet is blocked, the flow of water will be less and less. If it is because of limescale, the filter can be cleaned. Next, let's take a look at the cleaning tips for clogged kitchen faucets. Here are some answers.

Here is the content list:

• Clean with vinegar.

• Cleaning of the filter screen.

Clean with vinegar.

This method is suitable for kitchen faucets without filters. As we all know, tap water comes from tap water. One disadvantage of tap water is that it will form a kind of sediment in the long run, which will cause the kitchen tap to block and have a certain impact on home life. At this time, a cup of vinegar can solve this problem. First, pour an appropriate amount of vinegar into the prepared cup, then put a cotton ball in the cup, soak it all, and keep it for 5 minutes. Next, take the cotton ball out of the cup, and then plug it into the outlet of the faucet to be cleaned. Reserve a little cotton ball and wait about fifteen minutes to take it out. Then, remove the cotton ball, you can see the dirt and debris on the cotton ball, soak it in vinegar with a clean rag for 2 to 3 minutes. Wipe the edge of the kitchen faucet with a rag, and the dirt on the edge of the faucet is quickly removed. Finally, turn on the faucet and you can see that the water in the faucet is flowing normally.

Cleaning of the filter screen.

Generally speaking, the newly installed kitchen faucet will have a filter screen, and the use of the filter screen is to prevent the water from splashing during the use of the faucet. But the filter can not only prevent splashing, but it can also absorb a lot of dirt, which can cause the faucet to clog. At this point, the filter needs to be cleaned. The cleaning steps are as follows. First, you need to prepare some sewing needles or paper clips. If you don't have these, you can use toothpicks instead. Second, gently remove the filter head of the faucet, turn on the faucet, and see if the water flow is still small. If not, then the filter is the problem. If the water flow is still small after removing the filter, then it is not the problem of the filter, and a comprehensive inspection of the kitchen faucet is required. Third, use your fingertips to lift the filter out of the filter head. Be careful not to use too much force on your fingertips during removal, so as not to damage the filter. Fourth, the filter screen generally has two layers. Use the prepared sewing needle and knife to take out the white filter screen along the edge of the filter screen. When removing it, do not use too much force to dent or deform the white metal ring. Fifth, blow the filter with air, and at the same time use a toothpick to clean the dirt in the filter, and rinse with clean water after finishing. Sixth, install the filter back in the order in which it was removed.

Our official website is www.zswalnut.com. If you are interested in our kitchen faucet products, please be sure to contact us. Besides kitchen faucets, our faucet products such as bathroom faucets are also loved by people. Welcome to visit our factory and further exchange our bright future business.