Publish Time: 2023-03-20 Origin: Site
The types of faucets are rich and varied. Each type of faucet has different performance and requirements, and the precautions for its installation will also be different. Although the faucet is small, a little mistake in the installation process may bring great inconvenience to its use, so the installation of the faucet is very important. We should operate according to the selected type of faucet when installing. Next, let us take a deeper look at the installation precautions of various types of faucets. Here are some answers.
Here is the content list:
Thermostatic faucet.
In-wall faucet.
Single-hole basin faucet.
The water pressure of some solar water heaters is small, and the constant temperature faucet and its use can easily lead to intermittent water output. Therefore, this aspect should be considered when choosing to install a constant-temperature faucet. When installing a thermostatic faucet, the distance between it and the water heater should be well-controlled to avoid the problem of inconvenient hot water transmission. You should also pay attention to the location of the hot and cold water pipes, and not install them in reverse. Usually, the left side of the faucet is the hot water supply pipe, and the right side is the cold water supply pipe. Try to install thermostatic faucets before installing basins, bathtubs, and other items to avoid accidental damage to important accessories such as thermostatic valve cores during the construction process.
When installing the in-wall faucet, you should confirm the buried depth of the in-wall faucet according to the instructions in the manual, and confirm the exposed length of the elbow according to your own needs. Appropriate pipeline threads should be selected according to the valve body, water outlet, and shower thread standards indicated in the manual. To avoid damage to plastic and rubber parts during heat welding, they should be disassembled in advance. Moreover, the spool of the faucet should be embedded in the wall, and the embedded wall should not be too thin. To avoid damage to the valve core, its protective cover should not be removed at will.
When installing a single-hole basin faucet, a special angle valve should be selected, and the angle valve must be fixed with the hot and cold water pipes. It should be noted that non-dedicated extended water pipes should not be used to connect the angle valve to avoid the angle valve falling off due to excessive water pressure. If the angle of the water inlet pipe is not suitable, it should be properly bent and adjusted, but the bending angle should not be too large.
Our official website is www.zswalnut.com. If you are engaged in a related profession, or are interested in our faucet products, and want to know more about kitchen faucets, and bathroom faucets, please feel free to contact us. Founded in 2009, we are a professional kitchen enterprise integrating design, production, sales, and service. Our products are widely praised, choose us, choose our products, you will not be disappointed.