Publish Time: 2023-03-30 Origin: Site
With the continuous development of science and technology, there are more changes in daily necessities, and the faucet is a piece of furniture that must be used in the family. Among them, the kitchen faucet is the most frequently used. Next, let us understand the selection and installation information of kitchen faucets. Here are some answers.
Here is the content list:
Shopping tips.
Installation steps.
When shopping for a kitchen faucet, you need to consider the following points. First, kitchen faucets should be easy to clean. When the kitchen is working, people turn on the kitchen faucet with a hand that has grease and dirt on it, and it gets dirty. Therefore, it is best to choose products that do not stick to oil and are easy to scrub. Second, the size of the kitchen faucet should be appropriate. Some household kitchen faucets are prone to splashing, and the water cannot reach the center of the sink. This is caused by neglecting the sink and kitchen faucet. Therefore, when choosing a kitchen faucet, be sure to know the size of the sink. Choose the right faucet for this size, making sure the socket faces the center of the sink and can be rotated 180° or 360°. Third, kitchen faucets should be water-saving and environmentally friendly. The kitchen water consumption is very large, and the mainstream of modern decoration is still "energy saving and environmental protection", so pay attention to this when choosing a kitchen faucet. Water-saving faucets save 30-40% of water compared to ordinary faucets. There are two main types of water-saving faucets: One uses a good aerator to inject air into the water to prevent water drop and maintain a rinse effect, while also slowing down the water flow, reducing water flow and achieving water savings. Another is the handle "tip" design, when the handle is raised to a certain height, there is a noticeable pause, reminding us that the amount of water used has increased.
The installation of kitchen faucets is also a point that people pay special attention to. The installation steps are as follows. First, remove the entire accessories of the faucet, namely the tooth tube, rubber gasket, stainless steel gasket, and fixing nut. Second, thread one of the inlet hoses through the faucet opening and the countertop. Third, screw the passed water inlet pipe into the water inlet hole under the faucet and tighten it properly. Fourth, pass the entire removed tooth tube through the water inlet tube that has been screwed into the faucet inlet. Fifth, thread the second water inlet tube through the entire tooth tube and screw it into the other water inlet below the faucet, and tighten it properly. Sixth, align the tooth tube with the bottom of the faucet and tighten it properly, adjust the position of the faucet, and then fix the accessories and tighten them properly. It should be noted that the installation of the kitchen faucet must be stable. Because the kitchen faucet is used frequently and is moved around, it is easy to loosen, so the lock nut must be tightened.
Our official website is www.zswalnut.com. If you are interested in our kitchen faucet products and want to know more about faucet products, please let us know for a while. In addition to kitchen faucets, our bathroom faucet range is also worth your while.